By Mary Lendzion Photos courtesy of HPJ Performance HPJ Performance has grown. The successful performance shop which was located at 11 North 48th Street in Belleville, Illinois is now located about ten miles away at 34 Empire Drive in Belleville, Illinois. The inspiration for the move from the previous location with 4,800 square feet to the new location with 15,000 square f...

Written By Steve Baur Photography by Eddie Maloney Four the last 4 years, Albuquerque, New Mexico's John Urist has whittled away at his S550 Mustang and turbocharged Coyote powerplant, and his efforts were recently well rewarded when he drove to the winner's circle at the 2020 Street Car Super Nationals at the Strip at Las Vegas Motor Speedway. For Urist, whose Hellion Turbo company is ar...

QA1 is excited to announce the launch of its new limited lifetime warranty program. Offered on many of the most popular shock lines, the limited lifetime warranty can be applied to shocks purchased on or after 9/1/2020. A leader in shocks and performance products for nearly 30 years, QA1 has always had a commitment to quality. This new limited lifetime warranty is a way to further assure custom...

Strange Engineering's proven line of billet aluminum main caps improve strength for 8.8 Ford, GM 10 bolt, GM 12 bolt and Dana 60 housings. As horsepower increases, factory caps will deflect, which leads to premature wear of the gear and bearings, and ultimately resulting in failure. The Strange Engineering billet caps are made from 2024-T351 aluminum and provide increased rigidity and strength...

Written by Ainsley Jacobs Photography by Kevin DiOssi Racing with friends is great. Racing with family is fantastic. But, racing with friends who are also family brings the experience to a whole new level and that's exactly what the duo of Riste Pancevski and Tony Petrovski are doing with their notorious, naturally aspirated Fox Mustang. Growing up in Michigan near Detroit, Pancevski met hi...

By Mary Lendzion Photos courtesy of Chuck Watson Jr. Whenever Chuck Watson Jr. straps into his Mustang Cobra Jet and soars down track in NMCA Holley EFI Factory Super Cars, he's showcasing what he and Watson Racing are capable of. And, that's a lot. But for the 2021 race season, he will be behind the wheel of Jim Betz's Mustang Cobra Jet, which Watson Racing in Brownstown Township, M...

The year 2020 will be remembered as one that was so strange that it postponed the two biggest automotive aftermarket trade shows SEMA and PRI. This leaves all those member companies struggling to find a place to show off their most important products, old and new. With that in mind, here is RacePagesDigital.com's version of a virtual trade show. This section will run for the next few months wit...

At the end of the 2020 NMCA Drag Racing season, Holley EFI Factory Super Cars racer Chris Holbrook parted ways with his Cobra Jet Mustang to concentrate on customer engines. As it turns out, Holbrook will be concentrating on another racing program as well, as he and Whipple Superchargers are planning to step into VP Racing Lubricants Xtreme Pro Mod for 2021. As the headline states, the duo isn'...

Holley has released a new race-design 4500 intake for cathedral port LS engines. It's intended for maximum-effort combinations that need a bump in induction airflow. With its split design, users can port and modify intake runners to best suit their combinations. Additionally, the two-piece split design provides access for all levels of porting and modification. It utilizes shoulder bolt loca...

Written By Steve Baur Photography by the Author It's easy to become preoccupied with horsepower and speed. After all, that is what really gets our juices flowing, and it's a huge part of the performance aftermarket. But the older you get, the more you appreciate the amenities and increased comfort in modern vehicles. While an LS swap certainly made our subject Chevy S10 pickup fun to drive, it...

The Holley NMRA Ford Nationals and NMCA Muscle Car Nationals are proud to announce Gavin Carter has filled the newly created Racing Operations Manager position. His full-time role at ProMedia Events / Publishing / Productions will include the Race Director spot at all NMRA/NMCA national events along with pre- and post-event responsibilities related to the competitor experience and event logistics....

Strange Engineering is kicking off the holiday season with a Black Friday Sale. The company is offering 10 percent off and free ground shipping to the contiguous 48 States, with no minimum, for online orders placed Nov. 20 until midnight Central Daylight Time on Nov. 30. Order processing will begin the following business day. Please note that not all Strange products are available for online...

By Mary Lendzion Angel Gaulden learned a lot about race cars when she was a crew member for a race team. And, along the way, she discovered that she wanted to climb into the cockpit of her own car and compete. So in the fall of 2018, she signed up for Frank Hawley's Drag Racing School, and by January of 2019, she was testing in her daily-driven 2014 Camaro ZL1 at Showtime Sp...

Lakewood has introducd cast aluminum bellhousings for LS, small-block and big-block Chevrolet engines. They're designed to be an affordable, lightweight solution for street cars that don't require SFI bellhousings. They connect LS, small-block and big-block Chevrolet engines to transmissions using the standard GM pattern, including the Muncie, Saginaw, Borg Warner T10 and Tremec TKO transmissio...

Earl's new weld-in mounting rings allow the use of modern in-tank EFI fuel modules in custom or modified fuel tanks. The rings accommodate most late model GM, Mopar and Ford factory fuel modules which have been standardized to a common size with a thin 6" diameter hat at the top of the fuel module. Users can choose from aluminum, steel or stainless steel mounting rings for easy welding. For ...

Mac's has introducedd a new bracket to the family of weld-on tie-down products. The Mac's Flat-Back Bracket creates a permanent anchor point and is ideal for flat, metal surfaces like a chassis frame arm or crossmember. The Mac's Flat-Back Bracket can be used instead of a conventional axle strap to eliminate contact with critical components such as brake lines, wires and hoses. The Mac's Fla...

Coming from an entrepreneurial family, it's no surprise that SCE Gaskets founder, Ryan Hunter, was destined to own a business right from day one. Now, his company, which began in a garage, is a recognized leader in the manufacture of engine gaskets for automotive racing and high-performance applications. Growing up in the high desert of Los Angeles County in California, Hunter was inspired by b...

A 2020 Shelby GT500 can offer drivers a 760 horsepower 5.2L engine, 7-speed DCT and 10-second elapsed-times at the track. And now, JLT Performance is offering its new Master Cylinder Cover ($79) for the car, which was designed to match the factory battery cover and mimic the flow of the cowl to enhance the engine compartment. JLT's Master Cylinder Cover features a factory-like texture and semi-...

Mopar is unleashing the most powerful production muscle-car engine ever available to builders and enthusiasts with the launch of its newest crate engine the 807-horsepower Hellcrate Redeye 6.2-liter Supercharged HEMI V-8 engine. With the addition of this new supercharged HEMI, Mopar now offers five HEMI crate engines with a range of 375 to 1,000 horsepower, said Mark Bosanac, Head of Mopar ...

TREMEC, the leading manufacturer of manual transmissions and components, announces the release of the new TKX, a 5-speed RWD manual transmission developed solely for the aftermarket. We listened to our customers, combined their suggestions with our OEM technology and strengthened our aftermarket line up with the addition of the TKX, says Mike Kidd, aftermarket business unit manager at TREMEC. Th...

Interview by Mary Lendzion Photos by Mary Lendzion and Fastest Street Car Staff Drawn to competition, Mike DiDomenico has successfully raced several cars in several categories through the years. But it's the 1968 Camaro that he currently campaigns in NMCA VP Racing Lubricants Xtreme Pro Mod that pumps his passion for close competition and awe-inspiring accomplishments. The car bu...

Written by Ainsley Jacobs Photography by Kevin DiOssi Some things never change, including NMCA ARP Nitrous Pro Street racer Randy Dolensek's enthusiasm for the Mercury Cyclone. From his teenage years spent cruising in the cool car to his current campaign racing the classic, Dolensek's commitment to the Cyclone platform has never wavered. Back in 1969, Dolensek's brother Ron bought a new Mer...

Power management company Eaton today introduced its Twin Vortices Series (TVS ) R3100 supercharger rotors for aftermarket applications. Based on the design of the popular TVS R2650, the new TVS R3100 moves at least 10 percent more air and maintains the same design footprint within the engine bay. The all-new Eaton TVS R3100 is the next step in performance from the popular TVS platform, said J...

The year 2020 will be remembered as one that was so strange that it postponed the two biggest automotive aftermarket trade shows SEMA and PRI. This leaves all those member companies struggling to find a place to show off their most important products, old and new. With that in mind, here is RacePagesDigital.com's version of a virtual trade show. This section will run for the next few months wit...

The ROUSH name is revered in racing for producing killer combinations and powerful platforms. ROUSH Competition Engines North, while a global powerhouse in its own right today, developed from ROUSH's original start in the industry to focus on racing powerplants. Beginning his automotive career as an engine development engineer for Ford Motor Company in 64, Jack Roush quickly discovered drag ra...

Strange Engineering is offering a full line of 9 -inch and 10-inch ring and pinion gear sets from U.S. Gear and Motive. Based on the popular 9-inch Ford design, these gears are capable of handling the ever-increasing horsepower in classes including Pro Mod, Alcohol Dragster, Alcohol Funny Car and Radial vs. the world. Gear ratios range from 3.25 to 5.14 in the 9 -inch gears and 3.89 to 6.20 i...

The NMCA Muscle Car Nationals is excited to look forward into 2021 with the official Championship categories for next season. The Chevrolet Performance Challenge Series point-earning categories have been rolled into NMCA, expanding the series to 13 eliminators. Click to view the 2021 Preliminary Rules. Street Outlaw RETURNS to NMCA Muscle Car Nationals full-time in 2021 with a full...

The NMCA Muscle Car Nationals continues to celebrate 2020 from the amazing performances, tight racing, and the incredible people who make up the NMCA community. Specialty awards include Driver of the Year, Bob Curran Sportsman of the Year, Ambassador of the Year, and Crew Member of the Year. Each category represents a specific and special segment in the NMCA drag racing world and we rely on rac...

By Steve Turner Photography courtesy of Prestige Motorsports If you have a project car out in the garage that needs an engine, you have dreamed of dropping a mega-power engine between the shock towers. For fans of the LS platform, which is a popular swap into many platforms, a boosted version of this engine would really take that project to a new level. To that end, Holley Performance Products def...

Written by Jason Reiss Photos by Visner Engine Development from the FSC files In the world of high-stakes doorslammer drag racing, power is king. In classes like Radial vs. The World and Pro 275, the winning combinations have traditionally been based around the Hemi engine and the 481-X, both of which have been honed by several manufacturers and engine builders over the years into nearly unb...

Santa Ana, CA (October 23, 2020) ProMedia Events & Publishing is proud to announce ProMedia Productions, a new division for the prominent sanctioning body and media company. The newly formed brand is a for-hire event production and logistics group offering complete, turnkey motorsport event management. Some of the best businesses are created organically and ProMedia Productions is a perfec...

Written by Jason Reiss Photography courtesy of Autokraft Race Cars & Restorations Even more than 50 years later, the first-generation F-Body Camaro and Firebird twins remain popular machines in the world of motorsports especially in drag racing. The platform retains its demand for many reasons: striking appearance, simplicity, and perhaps most importantly, a robust aftermarket that delivers ...

ATI Performance Products has introduced its new 300M Output Shaft for C7 Corvettes and ZR1s equipped with the 8L90E transmission. Part #704050, the new 8L90E output is a direct OEM replacement, and requires no modifications. It's high-quality, in stock and ready to ship. ATI Performance Products is located in Baltimore, Maryland and specializes in producing and maintaining high performance prod...

Written By Steve Turner Photography courtesy of Paul's High Performance and Performance Racing Industry If you've been starting to hear the term Godzilla popping up in performance circles and you are wondering why, it's because Ford's latest pushrod engine is making moves from its intended home under the hoods of Super Duty trucks into the world of engine swaps and racing. ...

These engines are often direct derivatives of factory powerplant options that make more power when freed from the confines of factory emissions and NVH parameters. In the case of a fresh crate engine from the purveyors of the genre at Chevrolet Performance, it takes a legendary engine and pushes the performance even higher. The all-new LS427/570 builds on the legendary, racing-bred performance...

With deep roots in the automotive industry, Livernois Motorsports came into existence when founder Dan Millen followed a different path than his family's prior two generations. Now, Millen's company specializes in late-model Ford, GM, and Chrysler performance parts, service, and tuning, and has become a name known around the world. In 1949, Millen's grandfather founded the original Livernois En...

Written by Jason Reiss Photography courtesy of Pro Line Racing/Alan Johnson Performance Engineering In the world of high-stakes, no-holds-barred drag racing, one of the most successful over the last 15 years is Pro Line Racing in Ball Ground, Georgia. The company found record-setting success through the partnership of tuner Steve Petty and engine builder/driver Tim Lynch in its early days, s...

System 1 has added a compact, high-flow 10-micron fuel filter to its arsenal of premium quality fuel and oil filtration products. Engineered for use with high-output competition fuel systems, it's capable of maintaining a 40 GPM flow rate and suited for use in highly-boosted EFI applications. The compact housing, which is CNC-machined from billet aluminum in System 1's Tulare, California facili...

Interview by Mary Lendzion Photos by Mary Lendzion and Fastest Street Car Staff Kyle Salminen was six years old when he started going to the track with his family to watch his father, Matt Salminen, race. He enjoyed everything about it, from the sound of the engines to the scent of the exhaust, and that didn't diminish as the years went on. The day his father handed him a tool so that he could...

NMCA would like to kick-off the 2021 rules discussion in an effort to serve you better. With that in mind, please submit rule requests for the 2021 NMCA drag racing series by October 26, 2020. Our Tech Department, headed by Roger Conley, will begin evaluating those requests to help form the 2020 Preliminary Rules for next season. We value all of your input and while not all requests are granted, e...

By Steve Turner Photography courtesy of Brian Wolfe It is quite common for aftermarket companies to jump on a new engine platform to cement their status as the experts in that platform. Such development can yield dividends for years to come. It is unheard of, however, that someone who helped create a factory engine would shift gears to become its aftermarket champion. That is case with Ford's ...

Strange Engineering has built its reputation by developing reliable and innovative driveline components. With the evolution of power in the Pro Mod and Alcohol car ranks, Strange Engineering has responded with the introduction of its new and improved full floater kits. Improvements include scalloped hubs and drive plates, stronger chrome moly spindles, resigned wheel studs and proven two-piece ...

The NMCA Muscle Car Nationals returns to action in 2021 with six national events held at legendary motorsport facilities. The NMCA Muscle Car Nationals is home to thousands of vintage and modern vehicles participating across championship drag racing, street-legal competition, and car show arenas. It wasn't easy but we've managed to get our 2021 schedule out extremely early and we'll be visitin...

With the conclusion of the 2020 NMCA Drag Racing Series, the NMCA staff has tallied up the seasons' points totals. You can find this season's points document HERE. The 2020 NMCA Drag Racing series itself faced a challenge not seen before, but despite the challenges, the staff was able to deliver a five-race season to satisfy its hungry racers and fans who were looking to focus on something more...

Attention NMCA racers and fans! The nominations for the racer and crew awards have been tallied and now is your chance to vote on the racer and crew awards. Vote now by following this link: http://survey.constantcontact.com/survey/a07eglxhvi5k0pmort4/start Voting closes on October 14th, 2019 and the results will be set.   Thank you, we appreciate your participation in the nomination ...

Written By Steve Baur Photography by the Author Necessity is the mother of all invention, and FFP Customs Ryan Frazier realized he needed to build a product aid in the fitment of drivers who were purchasing his roll cages. When I got started on my own business, I was going to build and sell a rolling chassis, Frazier recalled. If I built a cage, they might not fit the car, so I starte...

Racers and hot rod owners can place thermal protection where they need it most with Design Engineering, Inc.'s new Stand-Off Kits. Designed as a safe, convenient solution for installing heat barriers, custom thermal shields and more, each Stand-Off is made from corrosion-resistant stainless steel that is long lasting and will handle high temperatures. Stand-Offs are ideal for creating a spac...

The new InVision Direct Fit Digital Dash System for 1982-1987 Monte Carlos, El Caminos and Malibus is a one-model (#7005) solution for an entire dash. The speedometer, tachometer, fuel level, oil pressure, water temperature and volts can all be monitored in one place. The InVision Digital Dash features a 12.3 LCD with three user-selectable screens. All kits include a wiring harness and sendin...