Fuelab Announces All-New Pro Series Line
Fuelab has a new Pro Series line for high horsepower, high flow applications where fuels such as methanol or E85 are used. At the center of the new series is Fuelab's 40501 Pro Series Spur Gear pump, engineered with unmatched experience in brushless fuel pump technology. This variable speed pump is built to handle over 2500hp, with extremely low current draw, and is compatible with gasoline, diese...
MAHLE Motorsport Introduces Ford 5.2L VooDoo Drop-in Forged PowerPak Piston Kit
MAHLE Motorsport's latest addition to a growing line of Ford Modular piston assemblies now includes the Ford 5.2L VooDoo Drop-in Forged PowerPak Piston Kit. Machined and inspected with the same stringent standards by MAHLE Motorsport North America, this forged replacement piston is available as a drop-in, ready-to-run assembly that requires no rebalancing or compression ratio change. The piston...
Holley Sniper EFI Stealth 4150 Braided Fuel Crossover Kits Designed to Provide Ample Clearance
The Holley Sniper EFI Stealth 4150 Braided Fuel Crossover Kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose and the TPS sensor mounted on the side of the throttle body. They come in two variations. The 534-236 kit contains a braided fuel hose, wi...
New 20 BBC Series Pistons Available from JE Pistons
After developing a multitude of custom pistons for big-block Chevrolet engines equipped with 20 cylinder heads, like the Dart Pro1 20 and Brodix SR20, the engineering team at JE Pistons has created the 20 BBC Series that combines high quality custom piston features with off-the-shelf convenience. The pistons are available with 23cc and 18cc domes, designed for high horsepower naturally aspir...
Vortech Superchargers Offers Billet Mounting Bracket Assembly for LS Engines
Vortech Superchargers continues to push the limits and offer even more power options to racers with a new Billet Mounting Bracket Assembly engineered to install the V-30 Centrifugal Supercharger onto Chevrolet LS engines. The V-30s have proven to be reliable, efficient and consistent superchargers, even under the harshest racing conditions, and are designed exclusively for modified performance ...
Tech Review E3 Lithium Batteries
By Steve Turner Photography courtesy of E3 Spark Plugs Let's face it, you probably don't think about your car's battery until it lets you down. In racing, that could mean you don't make the next pass or the next lap, and you lose a race. Moreover, today's racing rides are laden with gear that pulls major current, which can tax the battery and lead to less-than-optimal performan...
DEI's New Universal Upholstery Material Offers Protection and Finished Appearance
DEI's Universal Upholstery Material is constructed from black, perforated vinyl and laminated on an open-cell, 1/8" foam backing. Extremely lightweight and flexible for easy installation, the material can be used to reduce heat and noise while providing an attractive finished appearance, making it an ideal solution for any custom interior project. This Universal Upholstery Material is perfe...
Mickey Thompson Releases New ET Street Front Drag Radial Tires
Unlock the potential for quicker elapsed times with Mickey Thompson's new ET Street Front tires. A great compliment to Mickey Thompson's popular ET Street R and ET Street S/S drag radial products, the lightweight ET Street Front features radial construction and lower rolling resistance. ET Street Front tires are DOT-approved and street-legal, said Ken Warner, Vice President of Marketing for...
E3 Lithium Batteries Offer Multiple Benefits for Racers
E3 motorsports lithium racing batteries are packed with rows of lithium cells grouped in individual banks. The use of lithium iron phosphate allows the finished products to be lighter in weight than its lead-acid equivalent. Power to weight ratios have always been golden at all types of tracks from coast to coast. A 12-volt lead-acid battery that is a 40 Ah and puts out 800 cranking amps would ...
ProCharger Competition Bypass Valve Designed With Pro Mod Racers in Mind
The ProCharger Competition Bypass Valve was designed with Pro Mod racers in mind. It's compact, light and fast-acting, and it's for use in applications where an F-3R-136, F-3R-140 or F-3X-140 is needed. Key features include2.5" (63.5mm) outlet, Vband mounting and ultra fast operation. It's avaliable in black or red. Part numbers are 3FASS-023 for black and 3FASS-024 for red, and tetail pricin...
Amp'd 2.0 Throttle Booster Is An Advanced Throttle Modification Device
The Amp'd 2.0 Throttle Booster is an advanced throttle modification device which'removes throttle response delays and instantly puts users in total control of throttle response in their vehicle. A Bluetooth App provides full control over the Amp'd 2.0 Throttle Sensitivity Booster. Users will have the ability to instantly select from five preset throttle curves or customize their own throttle cu...
Ace in the Hole How Ace Racing helps stick-shift drivers get it done
Written by Ainsley Jacobs Photography by the FSC staff and courtesy of the manufacturer When real-world technology is applied to racing at the track, everyone wins. At Ace Racing, the hard-working team of enthusiasts made it their mission to make driving fun by offering compete, easy-to-install clutch kits for most domestic V-8 applications ranging from street to strip and circle track to tr...
MSD Releases Redesigned Atomic 2 System
MSD has released the Atomic 2 system, a ground-up redesign that utilizes an 865cfm throttle body with an integrated ECU, a full-color touch screen, a simple four-wire hookup and new features. It features four, 100lb/hr fuel injectors capable of supporting up to 650 horsepower naturally aspirated or 635 horsepower on forced induction applications. The Atomic 2 ECU is capable of fuel map self-lea...
Wilson Manifolds 123mm Hi-Boost Throttle Body Hits the Market
Wilson Manifolds has introduced the 123mm HB to its Hi-Boost throttle body line up. Specifically developed for severe duty and high boost applications, the new design provides industry-leading performance and durability. Wilson Manifolds starts with a massive 5/8 (.625 ) stainless steel shaft with unmatched sealing strength, Precision fit TPS engagement that is compatible with either Ford or...
Strange Engineering Offers Nodular Iron Case for Street and Hardcore Street/Track Applications
Strange Engineering continues to meet the needs of its customers by offering a nodular iron case designed for street and hardcore street/track applications, with posi units, helical differentials and lockers, but still rigid and strong enough to use with a spool. Strength and rigidity are key factors to a foundation that helps allow smooth and quiet gear operation. The Strange S-Series nodular ...
ENERGY SUSPENSION INTRODUCES 7-YEAR / 750,000 MILE WARRANTY
Energy Suspension, a world leader in performance polyurethane suspension parts, is proud to announce the release of its all-new, 7-year or 750,000-mile warranty. Energy Suspension designs and manufactures a complete line of Polyurethane Suspension Bushings, Universal Bushings and Motor & Transmission mounts. To ensure its customers receive the quality they expect, Energy Suspension employs ...
Kooks Headers and Exhaust Adds 2019 and Newer Ram 1500 Pickups to Torque Series Lineup
Continuing off the success of the Kooks 2019 and newer RAM 1500 long tube headers application, Kooks Headers and Exhaust is expanding the 2019 and newer RAM 1500 product line with the addition of Torque Series headers, and they are now available. The 2019 and newer RAM 1500 Kooks Torque Series Headers provide similar performance gains as the long tube headers with the benefit of less weight and...
New DiabloSport Suspension Controller Offered for 2015 and Newer Chargers/Challenger SRTs or Hellcats
The new DiabloSport Suspension Controller is a simple upgrade to instantly improve suspension systems in a Hellcat or SRT vehicle equipped with active suspension modes. The Suspension Controller replaces the factory controller with a simple Plug-N-Play installation. The upgraded calibration featured in the DiabloSport Suspension Controller improves handling and traction across the board by cont...
Lokar Performance Products Offers Interior Battery Disconnect Lever Kit
Lokar Performance Products Interior Battery Disconnect Lever Kit is a safe and quick way to shut off all electrical power right from the driver's seat. The red anodized billet aluminum hand lever is designed for quick visual recognition and quick actuation. Compatible with fire system kill switches, each kit comes standard with an 8-foot push / pull cable with additional cable lengths availabl...
Of Rage & War How Rage Fuel Systems supplies big-power beasts with plenty of fuel for battle
Written by Wes Taylor Photography by the author In the world of motorsports, many factors contribute to a winning program. You can't put the power down without optimizing the suspension, chassis, drivetrain, and powerplant. Even at its best, an engine won't do what the tuner asks of it without having enough to drink. Mike Kopchick, the owner of Rage Fuel Systems, set out to make certain that...
Tech Review Sonnax Smart-Tech Ratio-Style Servo Kit
By the FSC staff Photography courtesy of the manufacturer Whenever things go wrong, racers are always on a pass. Like a fisherman's tale of the one that got away, those mythical incomplete runs are favorite tales to tell around the pit when the racing action dies down for the night. While everyone enjoys a good story about what might have been, it makes for a much better story if your combin...
ProCharger F-3D-106 Supercharger Head Unit Released
ProCharger has released its F-3D-106 supercharger head unit for drivers of drag radial cars, dragsters and street cars who want a reliable way to make 1,400-1,800 horsepower. Even though this supercharger was recently released, it has already had some amazing success on the racing circuts and with those dyno-testing for heads-up classes. Combining the bulletproof F-3 gear case with a compact...
AutomotiveTouchup Offers Three-Step Process to Restore the Finish on Vehicles
Paint chips and scratches in a vehicle's paint are not only unsightly, but can lead to rust and even lower the vehicle's value. A three-step process, with materials and support from AutomotiveTouchup can restore the finish, and it's something that anyone can do and achieve professional-looking results. Depending on the size and type of touch-up project, the paint can be applied with a paint pen...
American Powertrain Introduces White Lightning TREMEC TKX 5-Speed Shifter
American Powertrain has introduced a new White Lightning shifter for TREMEC TKX 5-speed transmissions. The new TKX already shifts smoothly out of the box, but American Powertrain has taken it to the next level. Bolting on a White Lightning shifter shortens the shift by 30 percent and allows multiple shifter positions. White Lightning shifters feature American Powertrain's patented RevLok sys...
Mothers Introduces Ultimate Hybrid Line of Ceramic-Blend Finish Care Products
Mothers' new line of Ultimate Hybrid products combines the ease-of-use of traditional carnauba wax with the benefit of nano-ceramic technology while providing a timeless, liquidy-gloss shine. It's a balanced blend of advanced science and traditional car care. Mothers Ultimate Hybrid Ceramic Spray Wax combines the trusted natural protection of carnauba wax with cutting-edge nano-quartz cerami...
Bully Dog Thruster Expands Customization Options for More Vehicles
Bully Dog, an industry leader in engine tuning and calibrations, is proud to announce the release of the Bully Dog Thruster Throttle Enhancement Device. The Bully Dog Thruster is a plug-and-play device that allows anyone to adjust the throttle responsiveness of their vehicle. The easy-to-install device gives the driver access to a control knob that increases how quickly their vehicle responds t...
MAHLE Motorsport Introduces Ford 5.0L Modular 4-Valve Coyote/Voodoo PowerPak Plus Piston Kit
Mustang and F-150 racers and enthusiasts can indulge in their quest for more power with the introduction of MAHLE Motorsport's Ford 5.0L Modular 4-Valve Coyote/Voodoo PowerPak Plus Piston Kit. Manufactured to be a complete drop-in assembly piston kit for either the Ford V8 Coyote or Voodoo engine, the kit allows for more buildable horsepower for stock or modified Coyote or Voodoo engines. Th...
SCT Expands Product Line with New Vehicle Customization Options
SCT, an industry leader in engine tuning and calibrations, has announced the'release of the SCT Burst Throttle Enhancement device. SCT has devoted itself to the idea that engine tuning and calibration is a critical part of customization, and that enthusiasts should have the power to unlock the performance potential of their vehicles," said Marcelo Gomez, Chief Marketing Officer for SCT. "The a...
ProCharger Presents Its Big-Block Chevrolet Reverse Belt Drive System
ProCharger is offering big-power handling in a compact package with its big-block Chevrolet Reverse Belt Drive System. The company has had positive feedback from users of its Crank Drive systems, but realizes not everyone has the space to be able to use one, so ProCharger engineers have created a solution in its Reverse Belt Drive System. It can support massive amounts of horsepower, while also...
Special VP Racer Pack from VP Racing Fuels | Limited Time Offer
Fresh off the off-season and ready to race, VP Racing Fuels is offering highly discounted Racer Packs that have everything you need to replace all of the fluids on your car and get them ready for track action! Utilizing their highest quality engine oils, gear oils, performance coolants and brake fluid, every fluid in your vehicle will be fresh for a new race season and give you peace of mind kn...
Strange Engineering's New Billet U-Bolt Strap Kit Offers Strength and Reliability
Strange Engineering has introduced its new billet u-bolt strap kit. The chrome moly steel straps, ETD-150 steel studs and ARP thread locking nuts offer a 90 percent strength increase and superior reliability when compared to OEM style u-bolts. The consistent clamping force and 360 degree support of the u-joint cap increase u-joint life by reducing operating temperature and eliminating the poten...
Moroso Releases Two New External Oil Pumps Which Fit ProCharger Front Drives
Moroso has introduced two new external oil pumps, which fit ProCharger front drives. They are part # 22316 (reverse Rotation, fuel pump drive, V-Band mounting flange, 1.500 pressure section) and part # 22317 (reverse Rotation, fuel pump drive, V-Band mounting flange, 1.800 pressure section). Both external pumps feature a V-Band mounting flange to mount to ProCharger supercharger fr...
Hot Crate Heat up your next project with Mopar's 807-horsepower Hellcrate Redeye Supercharged HEMI crate engine
Written by Steve Turner Photography courtesy of FCA North America The horsepower wars are definitely raging on dealership lots, and no company revels in touting the output of its engine more than Dodge. However, these mega-powered modern engines are increasingly not limited factory machines. These days the company offers a wide variety of crate engines designed to power your project. The latest is...
Stainless Steel Insulated Pipe Shields by Design Engineering, Inc. Help Prevent Heat Damage
Increase driver and passenger comfort while protecting vital components from heat damage with new Stainless Steel Pipe Heat Shields from Design Engineering, Inc. Designed to prevent burns while protecting drivers and passengers from uncomfortable heat, the lightweight shields can be utilized in a wide variety of applications, including turbo down pipes, headers or any component of the exhaust s...
American Powertrain Has New Pro-Fit TKX 5-Speed System for 1966-1970 Mopar B-Body
American Powertrain has a new Pro-Fit 5-speed system for classic Mopar B-body cars featuring the new TREMEC TKX 5-Speed. The TKX Pro-Fit fits vintage Charger, Coronet, GTX, Road Runner, Satellite, Belvedere, Super Bird and Super Bees like an original A833 manual transmission with the correct shift position and tunnel fit. The new TKX features a streamlined case for zero tunnel modifications. Am...
MAHLE Motorsport 2021 Racing Components Application Guide Now Available
MAHLE Motorsport, a leading manufacturer of race-ready piston kits recognized for championships in NASCAR, American LeMans and other top series, has introduced a new 2021 application guide. It offers a complete listing of all PowerPak and PowerPak Plus Piston Kits offered for domestic and import applications, and features over 35 pages of tech information for quick and easy ordering that includ...
Mac's Tie Downs Introduces The Monkey Face Multi-Mount
Mac's Tie Downs has introduced the Monkey Face, a drop-in, stake pocket multi-mount designed to receive a variety of tie-down hardware. The unique Monkey Face design is laser-cut from .375 steel, welded to a .1875 steel tube and rated to 10,000-pound minimum breaking strength. The Monkey Face can be purchased with or without the new Low-Profile Lashing Winch. It accepts 2 tie-down webbing an...
Tech Review G-Force Performance Engineering ProBushings
Written by Jason Reiss Photography courtesy of GForce Performance Engineering Let's face it, chassis bushings are decidedly unsexy performance parts. They aren't shiny, billet, or covered in a high-visibility hue to catch the eye. Properly performing bushings are mostly out-of-sight, out-of-mind components that aren't even thought about until one or more fails. But according to Jesse Powell an...
Natural Selection Manual-trans monsters still prowl the strip in NMCA's DART NA 10.5
There's an inherent badassery that comes with stomping a clutch pedal and banging gears down the drag strip. In NMCA DART NA 10.5 presented by Diamond Pistons competition, many drivers elect to use an automatic transmission, but a select few still prefer the old school method of a stick-shift to get the job done. Prepping and driving a manual in any sort of racing category has its challenges, b...
American Powertrain Introduces Pro-Fit TKX 5-Speed Systems for 1955-1982 C1, C2 & C3 Corvettes
American Powertrain has introduced its new Pro-Fit 5-speed system for classic Corvettes featuring the all new TREMEC TKX 5-Speed. The new TKX Pro-Fit kit fits vintage Corvettes like an original GM manual transmission with the correct shift position and tunnel fit. The new TKX features a streamlined case for improved fitment with zero tunnel modifications. American Powertrain modifies the TKX sh...
New Terminator X Stealth 4500 EFI System Available from Holley
The Terminator X Stealth 4500 EFI System from Holley features eight 100 lb/hr fuel injectors capable of supporting up to 1500 horsepower naturally aspirated or 1250 horsepower on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability and wide-open throttle horsepower. It is designed to fit with ...
Design Engineering, Inc. Enters Phase Two of Three-Phase Expansion Project
Design Engineering, Inc., a heat and sound management products company, is entering phase two of a long-term, three-phase expansion project that will increase capacity at its headquarters in Avon Lake, Ohio. This expansion will allow DEI to expand our manufacturing, assembly and warehouse capabilities, and grow our R&D department, said Dave Ramirez, vice president of operations. With thi...
NOS CrossHair Plate 4-Barrel Professional Plate Offered
NOS CrossHair plate systems are designed with the serious racer in mind and are capable of 350+ horsepower. Based off of the ever popular Double Cross plate systems, the CrossHair takes the time-tested design and improved it for better distribution of fuel and nitrous. That is especially important with the complex intake manifold designs. The CrossHair plate system features double-down nitro...
Mishimoto Quick Release Clamps Now Available
Mishimoto Quick Release Clamps are now available. Offered in four colors, the clamps provide unique locking system for a trustworthy connection to piping, and they withstand up to a 400 F and 110PSI operating pressure range. They allow for angular, axial and radial movement, while remaining sealed with Viton O-rings. CNC-machined 6061 aluminum weld ferrules arrive ready for fabrication, and ...
Strange Engineering Offers Lower Control Arm Brackets with Multiple Mounting Locations
Strange Engineering continues to evolve its products to meet the demands of today's racers by offering lower control arm brackets with multiple mounting locations as standard equipment on GM housings. The newly-designed bracket allows for lower control arm adjustment to manipulate pinion angle, increase traction and improve overall performance in street and drag racing applications. The bracket...
Earl's Offers Hellcat Supercharger Intercooler Manifold for Classic Car and Truck Engine Swaps
Fitting a Gen 3 Hemi in between the fenders of a classic car or truck engine bay designed for a much smaller powerplant can be tricky. Earl's new Hellcat supercharger intake manifold helps gain back valuable under-hood real estate by creating almost two inches of extra firewall clearance for the factory Hellcat supercharger. The manifold is machined from billet aluminum and utilize universal -1...
Dart Debuts Re-engineered Iron Eagle Small-Block Ford Cylinder Blocks
Dart's small-block Ford Iron Eagle blocks are designed to work with the stock components, but are now much more than a stock replacement. The new Dart SBF block has been designed from the ground up for hardcore racing. These new blocks are cast from premium high strength iron with extra thick cylinder walls and decks. The main webs are beefed up and fitted with steel 4-bolt main caps. All the r...
DEI Offers Safety Products to Provide Protection for Eyes, Ears and Arms
Things can happen in an instant in the pits, meaning pit crews can never be too safe. DEI's Pit Crew Safety Kit includes vision, hearing and arm protection for professional mechanics, pit crew members and do-it-yourselfers. Kits include protective eyewear, ear plugs and Kevlar sleeving, all in one package and at an affordable price. Safety is the most important thing, which is why DEI is pr...
Proform Presents Omega-Mopar Emblem Dress-Up Kits
Mopar enthusiasts can make a statement under the hoods of their cars with the latest Omega-Mopar Emblem Dress-Up Kits presented by Proform. Available in both chrome and signature Black Crinkle finishes, the kits come with everything needed to pop the hood and look good after cruising. Made from high quality pre-polished steel, the kits are available for both small-block (LA) and big-block (B/RB...
Strange Engineering Promotes Benefits of Its Dual Rear Brake Kits
Dual rear brake kits have been become a familiar sight in the pits. Turbo-powered door-slammers can benefit from the extra clamping force as turbos are spooled up on the starting line, while sportsman cars and dragsters can have a second pair of calipers for additional braking or as a back-up brake system. Strange Engineering offers a full line of Pro Race Rear Dual Brake kits for all of the po...

FEATURED NEWS


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

join our

email list

You’ll be first to know about NMCA events, race results and so much more!