There are two sides to creating a safe drag racing environment at the Holley NMRA Ford Nationals and Red Line Oil NMCA Muscle Car Nationals.

Cold-Gold Sleeve Offers Superior Thermal Protection with a Distinct Appearance for Wiring Harnesses, Fuel and Brake Lines and Linkages.

Mac’s Custom Tie Downs keeps the NMRA/NMCA trailers organized and secured for the tens of thousands of miles travesed each year with its national event series.

Holley Dominator EFI kits are available for variety of popular applications, such as LS kits with and without drive-by-wire and transmission control and several universal kits for conventional pushrod Ford and Chevrolet engines.

Wilwood now offers a high-performance master cylinder with angled reservoirs specifically designed for GM cars and trucks with angled boosters.

Haltech releases new solid-state, programmable power distribution module.

In the world of high performance, Valve Cover Breathers have become a staple under the hood. CFM Performance has been in the game for years, so it knows the importance of proper crankcase ventilation.

Auto manufacturers transitioned from cable-actuated throttle bodies to drive-by-wire units to reduce weight and complexity while providing more accurate throttle control.

Prevent damage and burn-through of critical dynamometers tie-downs with DEI’s Dyno Strap Heat Guard.

Gulfcoast Driveshaft is now offering  SFI-rated aluminum driveshafts (PN DS-CHLHC-RE-A) for 2015-newer Dodge Challenger Hellcats and Demons.

Wilwood now offers upgraded D11 direct replacement calipers for 1965-67 Ford Mustang, Fairlane, and 1966-67 Ranchero originally equipped with Kelsey-Hayes brakes.

The UPR Bolt-in Anti-Roll Bar is part of the Pro-Series Suspension Kit used by all UPR racers in eliminating body roll and stabilizing the car down the track.

Easily & effectively block heat & noise in 1973-’87 GM regular cab truck models.

There is nothing quite like the thrill of cranking the throttle of a freshly installed carb and hearing the engine roar, an audible confirmation of a well-done performance upgrade. 

Ramping up performance with higher compression or power adders increases cylinder pressure exponentially.

DSR Performance, Don Schumacher Racing’s (DSR) performance aftermarket division, has launched the DSR 1150. An earth shattering 1150-horsepower crate engine based on the current generation (GEN III) HEMI.

Aeromotive, the leading manufacturer of aftermarket fuel systems and accessories, has released Direct Drop-In Fuel Pump Modules engineered for applications in 2015+ Dodge Charger and Challenger Hellcat models.

This kit includes all the fasteners and spacers needed to install a GM T56 Magnum or 1998 to 2002 GM LS T56 transmission to the popular L83-L84 Gen V engine.

The Detroit Speed Front Speed Kit 1 is designed to improve the handling and performance of your 1967-1970 Chevrolet/GMC C10/C15 Truck while lowering the front ride height by 4.50-inches.

With engine builders striving to build higher amounts of combustion pressure through increasing supercharger and turbocharger boost levels, Manley Performance has the answer for these high exhaust temperature environments with its expanded Extreme Duty valve line.

It’s the year of the Chevy Big-Block, and time for a long overdue engine makeover.

New for LS Swap enthusiasts, we've released a line of products that work together to ensure a proper fit for the LS Engine into specific applications.

A street performance tire that’s ready for the drag strip, the D.O.T. approved ET Street S/S and ET Street R tires feature Mickey Thompson’s R2 drag tire compound, the same proven compound used on Mickey Thompson’s ET Street Radial Pro tires.

Brian Tooley Racing fires up its dyno to test a pair turbo manifold merges in a hand-frabricated vs. CNC shootout.

American Powertrain is expanding their HYDRAMAX applications to include new 5 and 6 speed GM models.

Your engine relies on its valves to control the flow of air and fuel into the cylinder, seal the combustion in, and allow the spent exhaust gasses to exit.

Vortech Superchargers now offers Small Block Chevy owners a way to easily make more power while still retaining Air Conditioning and Power Steering if needed.

Holley EFI Smart Coils are a bolt-in ignition upgrade for your late-model Ford Coyote or Mopar Gen III Hemi engine.

In the quest to hot-rod small-block V8s, swapping intake manifolds is a long-standing tradition. In the early days, the options were few, and modified stock parts were common.

Trying to figure out the best way to get your Holley EFI Dash or Racepak Dash to fit in the factory location of your classic vehicle?

Reduce Installation Time and Effort, Increase Exhaust System Performance and Reduce Radiant Heat with Heatshield Armor Exhaust Insulation from Heatshield Products 

Holley is pleased to announce the release of awesome new products this week. Rekudo has launched a new suspension system for 1970-1981 Chevrolet Camaro and Pontiac Firebird that combines modern suspension geometry with an original equipment look and improved braking capability.

Power management company Eaton today announced its Vehicle Group is now offering Master Differential Install Kits that simplify the process of upgrading to an Eaton aftermarket differential.

The RACE Gate-Way allows plug-and-play Holley EFI in modern muscle machines

The Ford 9-inch rear axle is one of the most popular differentials in automotive history and the go-to choice for performance applications.

The options are many for upgrading the Forward drum on TH400 racing transmissions.

Stop skirting the safety rules and install a proper roll cage already.

Meziere Enterprises, the industry leader for electric water pump technology, brings you the solution for LS based, extreme duty engine cooling.

Fresh out of assembly is this new aluminum oil pan for fitting Gen V and Gen VI big-block Chevy engines in 2016-later COPO Camaros.

Anderson Composites has introduced new carbon fiber fenders for the 2020-2021 Mustang Shelby GT500 model. These new vented fenders, Type-TPF (SKU # AC-FF20FDMU500-TPF) were designed to release unwanted hot air from the brake area. The new design features a semi-arced opening towards the top of the wheel well with a removable screen mesh. The molded vent was designed to work seamlessly with ...

Safeguard performance GM TH400 and 4L80-E vehicles on the street and track with reliable, high-strength servo upgrades from Sonnax  the leader in transmission innovation. New for fall 2021, Sonnax billet aluminum Low/Reverse servo pistons prevent failure at any power level, a critical safeguard when cast OE pistons are brittle and prone to breaking. Part No. 34914-01 fits all TH400 and 95-ear...

Don Dixon devoted his life to serving others, and after years of hard work, he's busy having fun at the track. He is enjoying doing something for himself racing his '05 Pontiac GTO with his friends on the NMCA circuit. Much of his youth was shaped by his father's love of racing, as Dixon's dad had a knack for racing go-karts. "We would race around the driveway at the house,&qu...

When her husband, Dustin, convinced her to make her first pass down the dragstrip in 2019 at the NMCA World Street Finals in Indianapolis, Indiana, Lindsay Wheelock was a little intimidated. She quickly realized, though, that she loved the sport and has been full speed ahead ever since. That first outing had Wheelock behind the wheel of her father, Mike Alsop's Dodge Demon, which she ran in th...

Moroso has introduced a Tri-Lobe Two Stage Dry Sump Pump (part number 22372) that has a right side Motor- plate Mount and a 3/8" hex fuel pump drive with 1:1 ratio that accepts the popular 1.450 ID, 3 bolt, fuel pump swivel clamps. An expansion of the company's popular line of external oil pumps, this pump gives users the option of scavenging oil from the oil pan with one stage and using the se...

December 16, 2021In a continuing effort to align NMCA Xtreme Street and RTRA Ultra Street rules, the RTRA and NMCA Tech Committee released today, the latest draft of Xtreme Street preliminary 2022 rules. NMCA Xtreme Street will be contested for the NMCA Championship at all six NMCA National events. In addition, racers will gain points for the RTRA Ultra Street Championship at three NMRA/NMCA event...

Wilwood Racing's new front kits for struts with spindle-mounted wheels are some of the lightest brakes available, at less than six pounds per wheel. That includes the Dynalite billet aluminum single-piston caliper, 10.00 drilled rotor, hat, brackets, brake lines, and hardware. These kits deliver supplemental braking on cars using rear brakes and parachutes for most of their stopping. Kits are ...

It is with great sadness that the NMCA says goodbye to Jeff Smith, who passed away on November 17th, 2021 at the age of 62. Smith claimed the first race win for a Dodge Challenger 1320 after taking home the 12-second prize in the Dodge//Mopar HEMI Shootout at the 2019 NMCA Memphis Homecoming event held at Memphis International Raceway. Smith debuted his prized 2019 Challenger R/T Scat Pack 1320...

Written by Ainsley Jacobs Photography by Kevin DiOssi It doesn't cost a cent to be kind, is a life philosophy that Tom Blincoe has lived by throughout his entire life. His attitude of gratitude and graciousness has manifested into something beyond belief, and the gentleman from Kentucky made it his mission to share his good fortune with those around him particularly through drag racing. I...

By Mary Lendzion Mike Winters remembers the very day that he took delivery of his new 1982 Mustang. It was March 12, 1982, and it was quite wintry in his home state of Michigan. After driving it on the street for a while, he started taking it to the strip. He competed in NMCA Mean Street, NMRA ARP Open Comp and NMCA MagnaFuel Open Comp. He wasn't able to run a full season as he was clocking a ...