Spark plug boots and wires are located within one of the most intense heat environments on an engine: Next to the exhaust headers/manifolds. Insul-Boot from Heatshield Products encase spark plug boots in a specially formulated and woven thermal barrier rated for a constant 1,200 degrees F and intermittent 2,000 degrees F of heat exposure to keep high radiated heat from degrading the boots to the p...

MAHLE Motorsport now offers a cost-effective way to modify any 327 Small-Block Chevy engine for more power with the introduction of its new all-forged dome 327 SBC PowerPak Piston Kit. This shelf-stock piston kit, available wherever MAHLE Motorsport pistons are sold, provides everything needed to replace factory installed pistons in a 327cid SBC engine. The kit is complete with lightweight, low-fr...

DEI now offers its popular Floor and Tunnel Shield in an attractive deep matte black finish, providing a new option for underhood aesthetics. Manufactured with a high temperature thermal coating, it is ideal for protecting electronic components from damage while keeping the vehicle's interior cool and comfortable. Easy to shape and designed with a low profile that is only 3/16 thick, the shield c...

American Autowire's Highway 22 has long been a flagship universal system for wiring high-tech, high-end custom vehicles. The company has seen and heard evidence of customers installing the kit in just about every make or model vintage vehicle, 'some modern vehicles, off-road trucks and even industrial equipment. American Autowire has taken note of some suggestions over the years to make a great...

When Ford's Special Vehicles Team dubbed the supercharged Mustang Cobra Terminator in 2003, it was a nod to the pony car's at-the-time incredible power numbers. Seventeen years later, it's doubtful that SVT team could have ever imagined the added customized control available for 2003- 04 Ford Mustang Cobra Terminators thanks to the MS3Pro Plug and Play ECU from AMP EFI. The race-ready MS3Pro ...

The GB40 is a portable lithium-ion battery jump starter pack that delivers 1,000-amps for jump starting a dead battery in seconds. It features a patented safety technology that provides spark-proof connections and reverse polarity protection, making it safe and easy for anyone to use. It's a powerful battery booster that doubles as a portable power source for recharging USB devices, like a smartph...

High-horsepower 4L60E builds are everywhere these days thanks to the cutting-edge innovation and unrivaled quality of Sonnax shaft, clutch, servo and valve body upgrades. The newest addition to the company's robust lineup of performance parts is a heavy-duty, chromoly reaction shaft ideal for any modified vehicle running the 4L60E hard on the street or track. OE and aftermarket reaction shafts ...

Strange Engineering, the leader in driveline and suspension for over 50 years, continues to innovate and expand its line of superior products with the introduction of the Ultra 4 Link Housing. The Strange Ultra Rear was specifically designed to meet the needs of the most abusive racers. The core of the Ultra Rear is crafted from superior 206-T4 heat treated aluminum. The Strange housing is further...

PBM Performance Products, of Louisville, Kentucky, has entered an agreement to become the exclusive distributor for Profiler Cylinder Heads. The arrangement will allow Pro-Filer to focus its efforts on manufacturing and product development, while utilizing PBM's established distribution network. Pro-Filer Performance Products designs and manufactures state-of-the-art aluminum cylinder heads, in...

Whether you're an existing EZ-TCU customer, looking to upgrade to wireless or to purchase the complete EZ-TCU bundle, this new technology makes tuning a breeze. A revolutionary new bluetooth enabled module allows for communication between the EZ-TCU and an iOs or Android application, making it possible for a user to control shift points, firmness and aggressiveness directly from a smartphone or ta...

Putting a new engine in an older car or truck, or installing a new front clip, can often present lubrication issues, particularly if it's a front-sump Ford engine. Chances are that Aviaid, the company that's been building oil systems since 1961, can provide a solution. Aviaid manufactures a comprehensive assortment of wet sump and dry sump oil pumps, oil pans, tanks and accessories, as well as ...

RC Components continues to develop new products for its drag race wheel line that are built strong enough to withstand the rigorous demands of racing and reduce unsprung weight, and that appeal to racers. The Deuce rear wheel centers were designed with a 2-inch offset built into them, allowing the 15-inch wheels to be made all the way down to 1-inch backspace on a 15 x 14 or smaller, and down t...

AutoMeter has introduced the E-POWER 800 Emergency Power/Jump Starter. The versatile unit can jump start a car, as well as charge personal electronics and supply an emergency LED flashlight with SOS and strobe modes. Whether you're driving long distances or on an off-road adventure, the E-POWER 800 will provide peace of mind with no requirement for jumper cables or another vehicle. On a single ...

Aeromotive, the leading manufacturer of aftermarket fuel systems and accessories, has developed universal PTFE fuel lines and hose ends to be used in a wide variety of applications. The new PTFE fuel lines and hose ends provide superior resistance to harsh fuels such as gasoline, E-85 ethanol, methanol and other racing fuels compared to traditional nitrile rubber hose as well as a more professi...

Strange Engineering has been an innovator in drag racing brakes for over 20 years. From developing lightweight brake components, directional calipers and superior brake pad compounds, the company is now proud to introduce the next step in braking technology: The Strange Engineering two-piece rotors, which utilize a unique floating rotor design that allows for axial and radial growth as temperature...

The official store of the NMCA and NMRA, the Powermall Store, is offering $10 off T-shirts, hats and hoodies as part of a season kickooff sale. Additionally, shipping is free for orders of at least $60. To view the wide variety of available items, visit www.powermallstore.com. Here's just a sampling: [gallery size="full" ids="16679,16680,16681"]

American Powertrain has introduced a new GM to Tremec Magnum bellhousing designed with a dual-bolt pattern for use with either Chevy small-block/big-block or Buick Olds Pontiac (B.O.P) V8 engines. The bellhousing bolts-up to either the Tremec GM Magnum or a Viper T-56 6-speed transmission. Cast from A356 aluminum, the bellhousing has a thick casting to handle the torque, making it a cost-effective...

Kooks Headers & Exhaust is offering new headers for Coyote swaps in Fox Body Mustangs. The company's engineers have redesigned the headers to work on all Coyote swaps in Fox Body Mustangs using a Maximum Motorsports K-member, part number MMKM-2.1, for perfect fitment. And, for the first time, Kooks Headers & Exhaust is offering a new exhaust system for Coyote swaps in Fox Body Mustangs....

Moroso Performance Products, based in Connecticut, is a major supplier of automotive equipment for racing and street performance applications, and manufactures more than 4,000 products. Here's a sampling of the company's new items: Ford 5.0 Coyote/5.2 Voodoo, Mustang Fox Body, Road Race Baffled, Swap, Oil Pans: Engineered for '79-'93 and other Fox Body chassis with a 5.0 Coyote or 5.2 Vo...

Holley has released LT4 and LT5 Mid-Mount Accessory Drive Systems, which pull accessories in tighter than ordinary accessory drives for an integrated original-equipment-look. Three new versions are available: One for dry-sump LT4 engines, one for dry-sump LT5s, and one for wet-sump LT4s. A splined dual-bearing system eliminates belt stress on the power-steering pump's internal bearings, ensuring a...

Two fans at every NMCA event will be lucky recipients of a complimentary enrollment to the Frank Hawley's Drag Racing School, good for use within one year of winning the contest. The Frank Hawley's Drag Racing School contest is free to enter to spectators that purchase their ticket online from the FOAT ticket system. The program is courtesy of NMCA racer Jim Betz, who competes in Holley EFI Factor...

It's very easy to build big horsepower these days, but as you do, it's also important that the other areas of the driveline are reinforced to properly accommodate the added power. Fortifying the engine short-block is one of the first places people go to and Lunati recently released a new take on the connecting rod the X-Beam. While most engines utilize I-beam style connecting rods, heavy duty, ...

Ignition is a key ingredient in making internal combustion engines work, and controlling when the ignition events occur and the spark energy with which it fires can be a valuable asset in the power management game. MSD recently realized that there was a market for an ultra powerful CDI ignition system and got to work. The result of those efforts is the MSD Pro 600 CDI. MSD's latest capacitive d...

Strange Engineering's heavy duty line of S-Series Transmission and Pinion yokes are manufactured from premium high-tensile-strength nodular iron castings. The transmission and pinion yokes are CNC-machined to ensure concentricity and balance for ideal driveshaft operation. Most popular domestic transmissions and rearends are covered by the wide variety of parts that Strange Engineering has to offe...

American Powertrain now offers more affordable Mopar Small Block Aluminum Bellhousings for TREMEC GM/Viper Magnum T-56 6-speeds. Small-block applications include GM T-56 and Viper T-56, 318, 340, 360, Magnum 5.2, 5.9 Chrysler engines and Gen III Hemis. American made heavy-duty, high quality and extra thick aluminum casting is less expensive than traditional steel bellhousings. This is a cost ef...

Improve dragstrip safety and maintain stock appearance with a bolt-on Parachute Mount (PM760 - $219.95) from BMR Suspension. The bolt-on Parachute Mount is manufactured from 1-5/8-inch DOM tubing and 3/16-inch laser-cut plates to provide both high strength and minimal weight. The BMR Parachute Mount (PM760) is easily removed giving your Mustang a completely stock appearance when driven on the stre...

Moroso introduces Part No. 20105, a GM LS Cast Aluminum Rear Sump With Spin-On Oil Filter Provision Oil Pan Swap Kit. Fits GM LS Engine Conversions such as '55-'87 GM Cars & Trucks (except G-Body, check measurements for others) that require a rear sump oil pan with a Spin-On Filter provision. This product is for the individual who prefers the O.E.M. look of a cast aluminum oil pan. The oil ...

When Ford's Special Vehicles Team dubbed the supercharged Mustang Cobra Terminator in 2003, it was a nod to the pony car's at-the-time incredible power numbers. Seventeen years later, it's doubtful that the SVT team could have ever imagined the added customized control available for 2003- 04 Ford Mustang Cobra Terminators thanks to the MS3Pro Plug and Play ECU from AMP EFI. The race-ready MS3...

VP Racing Fuels, which sponsors the top categories in the NMCA and NMRA, is widely known as a go-to company for high-performance racing fuels, but the company expanded its portfolio of products recently. Those offerings include a line of fuel and coolant additives called Madditives that are designed to improve the performance of your vehicle in a number of areas. VP Racing's dive into the addi...

VP Racing Fuels, Inc., a leader in performance fuels, lubricants, additives, and gas station retail, is working to help prevent cancer through its annual Pink Jug campaign. With an increase of over 30% in donations to the Prevent Cancer Foundation in 2019, it was announced today that the push and the promotion would continue. At VP, we know a thing or two about research and development, said ...

The new Super Street Ford Aluminum, Pedestal-Mount, Ford Roller Rockers, have been completely re-engineered to unleash the horsepower of your Ford 302HO and 351W Engine (1977-1994)! Not only will they lengthen valve train component life and reduce wear and tear on valve stem tips, but also have an open spring rating of 650 lbs. For consistency and ratio accuracy, each 6061-T6 aluminum e...

Going fast with nitrous doesn't have to be expensive, says Mike Thermos, president of N2O systems manufacturer Nitrous Supply. The industry veteran, recently inducted into the MPMC Hall of Fame, is best known for launching NOS (Nitrous Oxide Systems) back in 1978 and being the driving force behind the hugely popular Pro Mod drag racing class. His most recent venture, Nitrous Supply, is a primary...

Modern Racing's new Solid-State Battery Disconnect uses the latest in Mosfit technology to bring your team added safety. The system features no moving parts and weighs only one-third that of a traditional mechanical disconnect. The simple and reliable construction is designed specifically for the harsh environment of motorsports. The system triggers in multiple ways, ensuring more safety on and of...

In the drag racing world, the NHRA and IHRA sanctioning bodies take safety to the next level by combining their resources with the SFI Foundation, examining elapsed times and speeds with car designs, and determining when safety items like battery cutoff switches, roll cages, protective clothing, and advanced driver licenses must be required. As speed increases, so does the required list of safety ...

Holley is pleased to announce the release of two new accessory drive upgrades for GM LT Gen V engines! These retrofit kits are the perfect add-on for your next LT4/LT5 swap - The alternator mount design offers more chassis clearance for LT4 engine swap applications and can be used with existing OE (original equipment) accessories and mounting locations. The hydraulic power steering kits works with...

LS-style block main bearing caps have notoriously tight tolerances making their removal time consuming and difficult without causing damage to the main cap. Enter the PROFORM LS Main Cap Removal Tool. Hook the tool beneath the cap and push down on the handles to ease the cap out with leverage, nearly eliminating the aforementioned issues. Featuring long, easy-to-grip handles with machine grooved r...

Aeromotive, the leading manufacturer of aftermarket fuel systems and accessories, has developed two new fuel pumps for the Brushless Line seven gallons per minute and 10 gallons per minute. The new Brushless Spur Gear Pumps also come with Aeromotive's new True Variable Speed technology for increased pump life. The 7.0 and 10.0 GPM Brushless Gear Pumps are constructed to deliver the large quan...

There is no lack of aftermarket options when it comes to tubular front K-members for your late-model Mustang, and sorting out the differences and fitments can be a long, tedious process involving hours of Internet searches, phone calls and more. Maximum Motorsports has been in the late-model Mustang game since it began and the company's high quality of research, design, and manufacturing has creat...

Aeromotive, the leading manufacturer of aftermarket fuel systems and accessories, has released its Gen II Stealth Tank designed specifically to meet the needs of Mopar Hellcat crate engine-swapped 1964 to 1976 Dodge, Chrysler and Plymouth A, B and E-body vehicles. Gen II Stealth Tanks utilize the Aeromotive award-winning Phantom technology to run a quiet, high-flow pump and baffle to ensure con...

For 25 years, ProCharger has built the best supercharger systems for Ford Mustang owners. From 1964 to 2019, ProCharger engineers have designed the perfect bolt-on supercharger system for virtually every Mustang there is; no matter if it's a V-6 daily driver or a 3,500hp Pro Mod racecar. And now, ProCharger has turned its attention towards a very special Mustang, the Shelby GT350R and its 5.2L Voo...

Shop Crane is a non-industrial, overhead bridge crane system that uses two parallel steel tracks, or runways, to guide a steel bridge over your work space. The bridge features a non-binding trolley that glides along the inside of the enclosed track to give you complete coverage within the frame of the system. By spreading the weight of the load over the bridge and runways of the crane, moving and ...

With a crisp, clear and full color display, the all new Haltech IC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the IC-7 offers market-leading features in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-colour shift light bar, the IC-7 connect...

The next big thing is here! Recognizing the popularity of huge-horsepower street cars with the ultimate 'sleeper image, Hellion designed the most innovative twin-turbo system in history the Street Sleeper! We have listened to our customers who desired an actual high-performance option for Challenger, Charger, 300C and Magnum vehicles. This new system places the turbos in a hidden location all f...

Strange Engineering has been an innovator in drag racing brakes for over 20 years. From developing lightweight brake components, directional calipers and superior brake pad compounds, the company is now proud to introduce the next step in braking technology. The Strange Engineering 2-piece rotors utilize a unique floating rotor design that allows for axial and radial growth as temperatures increas...

Turbosmart, Australian Manufacturer of Boost Control & Performance Products and 2018 SEMA: Best Performance-Street New Product Award Winner released its much anticipated eWG Electronic Wastegate A fully electronic actuatable external wastegate in 45mm & 60mm options. "I'm just so excited for my team. This has been a project or pure passion for the guys & it's been a long time in the...

E3, a leading U.S. manufacturer of performance spark plugs and DiamondFIRE ignition racing products, unveiled today at the 2019 SEMA Show the company's plans to launch a line of high-performance lithium batteries designed for street and track. The E3 Lithium line of high-performance, 12-volt batteries sets a new performance standard for batteries of all classifications. By utilizing advanced ch...

MAHLE Motorsport, a leading manufacturer of forged racing pistons and rings trusted by some of the top names in drag racing, now offers a BBC Elite Sportsman PowerPak Plus Piston Kit developed for 20-degree cylinder heads. Designed to maximize HP for 20-degree aluminum big-block Chevy cylinder heads capable of 1,200+ HP, this kit works seamlessly with the Brodix (BP, SR-20, BR), Dart Pro 1 and ...

From complete, 50-State emissions-legal systems, to the quickest and fastest supercharged modern HEMIs on the planet, Vortech has you covered when it comes to late-model Mopar muscle. These new complete systems will boost your stock 6.4L Charger to 730HP and 645 LB/FT Torque at 7 PSI from the V-3 Si-Trim Supercharger at factory redline using CA 91 Octane fuel. The complete, fully calibrated sup...

Drivers of custom street and high-horsepower strip machines have another chance to go skinny with the latest 27-inch sizing option added to Mickey Thompson Tire & Wheels Sportsman S/R front radial tire line. Available in 2020, the new 27x7.00R20LT size joins the popular 27X6.00R15LT, 27X8.00R15LT, 27X6.00R17LT and 27X8.00R17LT 27-Inch tall skinny offerings. This new size is approved for 5 ...

Xtreme-DI today announced a new product line of GDI High-Flow Fuel Injectors providing up to 30-percent more fuel flow over stock injectors in all GM Gen V engines (LT5, LT4, LT1, L86, L83, LV3). XDI high-flow injectors for the Ford Ecoboost 2.3L and 3.5L engines, the Audi/Volkswagen 2.0L engine, and additional engines are in development and will be available in the near future. XDI injector...