New Product Xtreme-DI launches +30% GDI High-Flow Fuel Injectors for GM LTx-Engines
Xtreme-DI today announced a new product line of GDI High-Flow Fuel Injectors providing up to 30-percent more fuel flow over stock injectors in all GM Gen V engines (LT5, LT4, LT1, L86, L83, LV3). XDI high-flow injectors for the Ford Ecoboost 2.3L and 3.5L engines, the Audi/Volkswagen 2.0L engine, and additional engines are in development and will be available in the near future. XDI injector...
Tru-BoostX Boost Control Just Got Smarter And More Powerful
The beloved Tru-Boost Gauge has been put to pasture, and is replaced with the new X-Series Tru-BoostX Boost Controller Gauge (PN 30-0352). The Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost. The King is dead, long live the King!...
HELP WANTED RPM Act Reintroduced to US Senate and Needs Your Support!
Time for action! The RPM Act was reintroduced in the U.S. Senate for the current session of Congress. The Recognizing the Protection of Motorsports Act of 2019 (RPM Act) protects Americans right to modify street cars and motorcycles into dedicated race vehicles, along with industry's right to sell the parts that enable racers to compete. You may be one of the thousands of supporters who cont...
Billet LS Block/Heads/Crank from Energy Manufacturing and Callies Performance Products
Written By Steve Baur Photography Courtesy of Energy Manufacturing and Callies Performance Products There is a certain level of engine building where custom parts are required, and the unfortunate side effect of custom is lengthy delivery times. Energy Manufacturing, working with its sister company Callies Performance Products, set out to greatly reduce the time racers and engine builders ...
Raising the Bar This Edelbrock/Musi Signature Series engine isn't your daddy's old 632
Written by Mike Carpenter Photography by the Author When Bill Kuhlmann broke the 200-mph barrier in 1987 with a 615-cubic-inch engine combination, that history making run changed the industry forever. Nitrous began to earn wide acceptance and monster-displacement engines became the norm. While breaking that mark remained a part of history, the 615 engine combo soon morphed into what we know tod...
SYSTEM 1 INTRODUCES CLEANABLE OIL FILTER
System 1 has introduced a new canister-style oil filter with an easily removable stainless steel mesh element. This facilitates prompt inspection of the lubricant for engine-damaging debris, and eliminates messy filter bisections. Engineered to fit virtually any engine block or remote mount, the housing is CNC machined from billet aluminum and black anodized. A 45-micron element is standard, bu...
NEW 6R80 FORD TRANSMISSION BLANKET BY STROUD SAFETY
Stroud Safety has designed and is producing a SFI 4.1 rated Ballistic Blanket for the increasingly popular Ford 6R80 transmission. This blanket features seamless ballistic nylon construction, high-strength straps, and hardware to fit most applications. The 6R80 transmission is found in 2011+ Mustangs and is popular in the swapped engine classes. It's extremely strong from the factory and ready ...
New Product MSD Releases 8 Channel Pro 600 CDI
Holley is pleased to announce the release of the MSD PRO 600 CDI, an innovative eight-channel capacitive-discharge ignition developed specifically for high-horsepower applications with extreme cylinder pressure and coil-near-plug engine-management systems. Compatible with Holley EFI, GM LS platforms, and virtually any EFI setup (both 5v and 12v drivers), it's perfect for the high cylinder pressure...
Get Your OEM Replacement Parts Fast Through Tascaparts.com
Are you looking for OEM replacement parts for you street or race car Maybe you want to upgrade your Mustang from stock GT to GT350 status Tascaparts.com can supply you with all of the high-quality oEM parts you need whether you're updating, upgrading, or simply repairing your car. TascaParts.com stocks thousands of OEM replacement parts from over a dozen OE manufacturers and the parts are rea...
Need OEM Parts For Your Project Tascaparts.com is your Go-To Source!
Save yourself time and the trouble of searching out the best deal for OE replacement parts by calling Tascaparts.com and getting what you need, when you need it, and at a reasonable price. TascaParts.com stocks thousands of OEM replacement parts from over a dozen OE manufacturers and the parts are ready-to-ship to customers across the US and internationally. The Tasca Auto Group is based in ...
Factory Parts Fast Tascaparts.com Is Your Source For OEM Replacement Parts
Whether you need factory replacement parts for your daily driver or your race car, TascaParts.com the Official OEM Replacement Parts Supplier of the NMCA Muscle Car Nationals has what you need to get you back on the road or on track and through to the finish line. It has never been easier, thanks to TascaParts.com, to replace a broken side-view mirror, ripped seat, cracked grill, or any other p...
Keith Wilson Talks About the Latest Chevrolet Performance Camaro Rolling Chassis
The late-model COPO Camaro has been a success for Chevrolet Performance with racers, collectors, and speculators alike grabbing each batch of 69 cars that are assembled each year. Giving more options to potential COPO customers, Chevrolet Performance began offering COPO Camaro Rolling Chassis or CRC, which for half the price delivered a race car built on the same production line as the COPO, minus...
1,650+ HP 632ci Crate Engine Musi Racing Engines and Edelbrock team up for a race-ready crate engine
Text and Photos by Mike Carpenter When Bill Kuhlmann broke the 200-mph barrier in 1987 with a 615-cubic-inch engine combination, that history-making run changed the industry forever. Nitrous began to earn wide acceptance and monster-displacement engines became the norm. While breaking that mark remained a part of history, the 615 engine combo soon morphed into what we know today as the 632. ...
New Products ProCharger 50-State Legal HEMI Supercharger Systems
Recently ProCharger expanded its complete supercharger systems line-up with eight newly authorized 50-state legal HEMI packages, which span through seven year/model/engine applications. One doesn't have to look much further than the NMCA Dodge/Mopar HEMI Shootout to realize the popularity of the late-model HEMI movement with upwards of 80 cars competing at each muscle car nationals, proving the ne...
Haltech Elite VMS No EFI No Problem!
Written by Phillip Thomas Photography courtesy of Haltech and Eric Kenward When you're looking at big-power mechanical injection or carburetion, it sometimes feels like being a boulder sitting on the banks of a river as the march of technology flows around you. While we've seen a rapid growth of EFI products and their capabilities, management systems that are tailored for mechanical injectio...
New Product Sonnax TH400 Slip Yoke for Big Power!
The driveline is often the last thing considered when jacking up power to extreme levels but a failure at the track is not the time to learn your slip yoke is the weak link. The new TH400 roller bearing slip yoke from Sonnax takes that worry completely off the table. Proven indestructible in track and street runs plus torture testing in the lab, you can confidently run colossal power from transmis...
New Product Energy Manufacturing Billet LS Block, Cylinder Heads, and Intake Manifolds
Energy Manufacturing Ltd.'s mission is to make life a little easier for LS engine builders and racers. Since early 2018, the company has been quietly stocking a full line of precision tuned and tested parts - billet aluminum LS engine blocks, manifolds, and cylinder heads are now on-the-shelf and can be shipped within a short lead time. The company is proud to have a working agreement with Visner ...
New Product DeatschWerks Coyote & LS1/LS6 Fuel Rails
DeatschWerks has expanded its fuel rail product category to include two popular modern-muscle applications: Ford Mustang 5.0 Coyote and GM LS1/LS6. Both the Mustang and GM LS rails have a starting retail price of $259. These rails are available immediately for order from DW dealers and distributors around the world. The DW fuel rails are CNC'd from billet T6061 aluminum with integrated brack...
New Product Speedtech Performance Drag Sub-frame and Spindle for Camaro and Nova
Speedtech Performance, who is well-known in the performance handling markets, has expanded their offerings to include drag racing specific front sub-frames for 67- 69 Camaro and 68- 72 Nova. The tubular front-end can be bolted to the firewall for ease of installation and includes large diameter chromoly upper and lower control arms. The sub-frame can use factory or Speedtech aluminum spindles...
Where It All Started Frankenstein Engine Dynamics
Written by Ainsley Jacobs Photography courtesy of Frankenstein Engine Dynamics From his teenage days porting cylinder heads and learning theory from a NASCAR veteran, Frankenstein Engine Dynamics mastermind Christopher Frank has been involved with practically every form of professional motorsport and his company is rapidly gaining popularity as a result. Originally from Florida, Frank, no...
Twice As Nice Adding two wastegates for more control
The wastegate is a simple device. Its main function is to regulate boost pressure by venting excess exhaust gases into the atmosphere. It provides excellent boost control on turbocharged vehicles, and is a critical piece of the puzzle to achieving maximum power output regardless of engine combination or turbocharger size. Over the last several years, turbocharger technology has improved perform...
Tech Review Aerospace Components 2010-2015/2016-2019 Camaro Brake Kits
  Written By Steve Baur Photography Courtesy of Aerospace Components and Gwatney Performance Innovation From the whirling, buzzing and busy CNC machines at Aerospace Components comes the company's latest high-performance brake upgrades whittled out of billet aluminum and designed specifically for 2010-2015 and 2016-2019 Camaros. Aerospace Components offers both front and rear brak...
AEM Releases New Stainless Steel Water/Methanol Injection Solenoid
AEM has released a stainless steel Water/Methanol Injection Solenoid (PN 30-3326) that eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body fe...
New Product Racetech USA 4100HR Racing Seat
Today's drag race vehicle interiors are getting more complicated as safety continues to evolve as cars get quicker and faster. Any serious small-tire or Pro Modified racecar features either an SFI style cage design, which includes a funny car hoop with accompanying bars to create a cocoon around the driver for maximum protection in a roll-over situation. Racetech has been a standard seat in many h...
Driven Racing Oil's New GP-1 Synthetic Blend High Performance Motor Oil
GP-1 from DRIVEN Racing Oil features a high zinc content specifically engineered and tested to deliver Increased horsepower along with more than 30 percent better engine wear protection, compared to the competition. The new oil has been uniquely compounded from Pennsylvania Grade Petroleum. If you've ever studied high performance lubricants you've probably heard that Pennsylvania Grade sourced ...
Keep It Clean NEW, NON-SFI RATED ENGINE DIAPER FROM STROUD SAFETY!
Stroud Safety's new Non-SFI Engine Diaper provides the Sportsman competitor with an economical and effective solution for oil and debris containment in the event of catastrophic engine failure. These diapers are constructed with the same ballistic nylon used on the company's SFI approved diapers. They also feature 4,000-pound strapping and the highest quality lugs and fitments unlike the inferior ...
Ray Barton Racing Engines Ups The Ante for 50th Anniversary COPO Camaro Shootout at NMCA All-American Nationals
Ray Barton Racing Engines, a major supplier of COPO Camaro engines in Stock and Super Stock, is adding thousands of dollars to the winner's purse for the 50th Anniversary COPO Camaro Shootout, held exclusively at Summit Motorsports Park during the NMCA All-American Nationals over the weekend of August 22-25, 2019. The high-acclaimed engine builder from Pennsylvania is swelling the purse to $5,0...
New Product SAFE RACE Coolant
This year was the 103rd running of The Indy 500 and it produced a remarkable display of tenacity from 15th qualifier young Aussie James Davison. Driving the SAFE Antifreeze | Coolant sponsored entry of Jonathan Byrd Racing, Davison made it up to 4th spot before he was spun nearly 180 degrees near his pit box by Penske driver former winner Helio Castroneves. Fortunately, no one was injured or equip...
New Product Moroso LS Drag Race 7.5-inch Deep Oil Pan for 5th Gen Camaro and COPO Camaro
Moroso introduces a GM LS Drag Race 7-1/2" deep, Aluminum oil pan, Part No. 21158 for 2010-2015 Camaro and 2012-2015 C.O.P.O. Camaro. Features a trap door baffle assembly, anti-climb baffle and anti-slosh baffle to keep oil contained in the oil pump pickup area during Drag Racing. Oil Pan has a billet aluminum rail with a fabricated aluminum sump and clears 4.25" stroke with most steel rods. Can b...
2019 Mid-Season Rules
The NMCA Technical Committee has updated the 2019 class rules to reflect mid-season changes. Classes which have had changes made with have an update date of (6-1) in red. Thanks to everyone for their input on these changes. They may be found >>here<<
NEW Performance Street Torque Converters From TCT
The Bottle Rocket Series of torque converters is here! TCT (Torque Converter Techniques), the converter division of Dynamic Racing Transmissions, has'developed two levels of converters tailored to make your Street Rod or Street Machine the KING of the boulevard! The Bottle Rocket level is perfect for the street rod and street machine with a mild cam, performance intake, small tube headers and p...
Classics Set In Bronze Race Star Wheels Launches New Finish For Popular Wheels
  Race Star Wheels will now offer its popular 32 Mirage, 92 Drag Star Bracket Racer and 95 Recluse wheels in bronze starting this June. We received really great feedback on the new bronze finish and I'm excited to see them on more cars in the very near future, said Race Star owner L.B. Davis. Race Star Wheels are designed for performance street and drag strip use. All Race Star wheel...
SCREAMING CONE DON T TREAD ON ME TEE AVAILABLE NOW ON POWERMALLSTORE.COM
If turning corners is your passion...we have a tee just for you! Wear this iconic tee as the Screaming Cone boldly declares Don't Tread On Me on the back. The front of this 100% cotton charcoal tee has the NMCA WEST Auto-X logo as well. Autocrossers unite! Tread on over and get your Screaming Cone tee today at POWERMALLSTORE.COM! Available in men's sizes S - 3X. It's a killer tee with a killer d...
Tech Review Aeromotive Brushless Fuel Pumps
By Steve Turner Photos by Fastest Street Car and Aeromotive Editor's Note Aeromotive is celebrating its 25th anniversary in 2019 and the company is still actively supporting racers in the NMRA and NMCA series with a robust contingency program. Visit NMRA and NMCA event pages for the extensive list of products eligible for the all-cash contingency rewards. Aeromotive's Jeff Stacy told RPD/FSC...
New Product Sonnax 4R70W/AOD-E Smart Tech Drum Upgrade
Imagine racing a Ford with an automatic that can go head-to-head with the durability of a Powerglide, 400 or 4L80. Confidently running big power through AODE, 4R70W series transmissions is now a reality. Sonnax the most trusted name in transmission innovation is proud to announce the innovative new Smart-Tech direct clutch drum and shaft kit. Proven to handle even the most extreme torque and ...
New Product QA1 Full Suspension Solutions for C10 Square Bodies
Now you can upgrade all four corners of your 1973-1987 C10 with a new torque arm design for the rear of the square body pickups, a complement to the front suspension systems released last year. Available now for preorder, the systems will begin shipping at the end of May 2019. With these all-new, engineered-from-scratch rear systems, truck owners can add modern performance to a pickup that was ...
Keep Your Pistons Covered
Keep your pistons free of dings, dirt, and grit in the pits or at the shop. Made from durable ballistic nylon, these stylish covers from Stroud Safety protect your pistons so they are ready to go during engine rebuilds! Stroud Safety has been supplying competitive drivers with drag chutes and launchers, seat belts, window nets, ballistic blankets and diapers, fire suits, safety apparel, fire su...
Strange Engineering's New Quick Release Steering Coupler
Strange Engineering continues to improve and expand its superior line of products with the introduction of the new Quick Release Steering Coupler for Sparco steering wheels (Part #Q1200SPAR). Strange Engineering is proud to offer the SFI certified quick release steering coupler for the Sparco steering wheels. This new addition is made with the same high quality materials and tolerances as the e...
Nitto Takes Its Popular NT555 Tire to the Next Level With the NT555 G2
The Nitto Tire brand entrenched itself in the hot late-model Mustang scene over two decades ago and since then, the company has grown by leaps and bounds and can be seen on any brand of late-model muscle car, as well as restored and restomodded classics, and more. The Nitto NT555 tire that started it all has been supremely successful, and helped launch a number of other Nitto Tire models, includin...
New Product IDIDIT Performance Quick-and-Easy Steering Wheel Centering
Racers who require a removable steering wheel can now be assured of perfect wheel centering every time, thanks to the IDIDIT Performance Quick-Release Steering Hub, which now comes standard with a Centering Pin. IDIDIT Performance has upgraded all of its 5- and 6-bolt steering hubs to include a centering pin as part of the quick-release hub that allows the steering wheel to be smoothly engaged ...
New Product Moroso GM LS Ignition Wire Sets with Aluminum Boots
Moroso released GM LS Ignition Wire Sets with aluminum shielded spark plug boots, Part No. 73659 have blue wire, Part No. 73679 have red wire and Part No. 73730 have black wire. The wires are 9-. long, fit Moroso Tall Valve Covers or OEM Valve Covers, OEM and Aftermarket Coils. Like all Moroso Ultra 40 ignition wire they have a highly engineered spiral wound conductor, locking stainless steel ter...
Brian Iceman Devilbiss Tops EATON TVS Supercharger Throwdown at NMRA/NMCA All-Star Nationals
This year EATON Performance called out all of the TVS supercharged vehicles to come to Atlanta Dragway in early April for the NMRA/NMCA All-Star Nationals and see who is king of the hill. The EATON TVS Supercharger Throwdown would pay the winner $1,000 cash, a supercharger of choice from Eaton's technical partners (Edelbrock, ROUSH Performance, Magnuson Superchargers, and Harrop), and hand out...
Race Wrap Chevrolet Performance Challenge Series, Round 1
House of Speed Round 1 of the 2018 Chevrolet Performance Challenge Serieskicks off at Atlanta Dragway Bringing Chevrolet performance back to the Atlanta, Georgia, area, the NMCA hosted the first round of the 2018 Chevrolet Performance Challenge Seriesduring the 10thAnnual NMRA/NMCA All-Stars presented by MAHLE Motorsport event. Leading off the Challenge series was the heads-up eliminatorC...
New Product Holley Single-Plane Split-Design EFI Race Intake Manifolds
Holley is pleased to announce the release of their Single-Plane Split-Design EFI Race Intake Manifolds for GM Gen 3 LS engines. They're perfect for race and high-performance LS engines and are designed specifically for cathedral-port cylinder heads and 4150-style square-bore throttle bodies. They're lighter than ordinary split race intakes and cost one-third to one-half as much. The two-piece conf...
Have a Few Used Big Tires Bring 'em to Atlanta!
If you're heading to Commerce next week, and have some used BIG tires you need to chuck, please stick them on your trailer. We could use them for the tire rotator/track prep. We're looking for: Any 16-inch Mickey Thompson or Goodyear Slicks Preferred tires are: M/T 3186 34.5/17/16 MT 3195 or 3196 35.0/15/16 MT 3190 or 3191 34.5/13.5/16  
New Product FUELAB Expands H/E Brushless Twin Screw Pump Series
With over 10 years of brushless fuel pump innovation, FUELAB has your needs in mind with every new product release. Building on the highly successful 474 Series external brushless twin screw pumps, we are proud to offer our 484 Series in-tank brushless twin screw pumps for the most demanding applications. The new in-tank version has all the great features of our brushless twin screw design ex...
Tech Review Billet Specialties Win Lite Wheels
By Miles Cook Billet Specialties is a multi-faceted manufacturer. The company offers complete lines of all sorts of cool parts like steering wheels, front-engine dress components, and accessories for the interior and exterior parts of the cars we all know and love. While that stuff is all well and good, the company's line of wheels interests us the most. More specifically, its Win Lite line ...
New Product Aeromotive Adjustable Universal In-Tank Brushless Fuel Pumps
Adjustability is the name of the game for Aeromotive's latest additions to its popular Brushless Fuel Pump Series. Based on customer feedback from the 2018 PRI Show, the fuel delivery experts at Aeromotive Inc. went to work creating all-new, adjustable-height, in-tank configurations of the company's Brushless Fuel Pump Series. The Brushless A1000 (#18368), Brushless Eliminator (#18369), Brus...
S197 Roll Cage for 2010-2014 Mustangs By Fathouse Fabrications
Ensure your car meets the NHRA safety standards with Fathouse Fabrications 8.50-spec, weld-in cage kit. The kit includes the dash bar, steering column mounts, cage floor plates, and dash plates. Countless hours were spent developing Fathouse Fabrications' S197 roll cage kits to insure proper fitment and give you a professional fitting cage. Installing a cage in your car is a job that requires...
Flex-A-Lite Direct-Fit Radiator and Electric Fan System for 2003-2007 Ford F-250 and F-350 Trucks with 6.0L Power Stroke Turbodiesel Engine
Owners of 2003-2007 Ford F-250 and F-350 trucks with the 6.0L Power Stroke turbodiesel engine can now benefit from significantly better engine cooling with a Flex-A-Lite Direct-Fit Extruded Tube Core radiator. This new radiator application is available both with (part number 315360) and without (part number 315300) a Flex-A-Lite dual-electric fan. The electric fan system replaces the factory be...
1 2 3 4 5 6 7 8 9 10 11

join our

email list

You’ll be first to know about NMCA events, race results and so much more!